HVI parameters are used to measure the quality of cotton bales. These parameters are important for grading and sorting. The measurement process is divided into two different stages, which includes:
- First stage of HVI parameters measurement procedure involves taking an initial reading on a sample of raw material using a standardised method developed by HVI.
- Second stage involves repeating this measurement on each sampled bale in order to obtain a final value which represents the overall quality attributes of that particular batch at that point in time
1) Mic – Micronaire
Here are some of the interesting points about Micronaire:
- Micronaire is a measure of the fineness of cotton.
- It can be calculated using the following equation:
M = D/1000, where M is micronaire; D is diameter; and 1000 is an average value for each filament diameter in millimeters.
2) Length(MM) – Staple Length In MM
Length of staple is the length of individual fibers in a cotton bale. It is an indication of the quality of cotton. A long staple has more fiber length than a short one, which means it will be less likely to break when processed into bales or even into yarns.
Longer staples are generally considered better quality because they don’t break easily during processing and have more cotton luster (color). Longer staples also tend to have fewer impurities, so you can expect less shrinkage when you wash them at home with your machine set on a gentle setting as opposed to washing clothes using hot water alone—which can cause shrinkage due to shrinking caused by friction between different surfaces rubbing together while drying out after being washed.
3) STRENGTH(G/Tex) – STRENGTH PARAMETER
Strength is a parameter that measures the tensile strength of the fabric. Strength is measured in g/tex, which is equal to how many grams of force can be applied to a single tex of fabric before it breaks. When you look at your garment’s label, you may see this term and wonder what it means. The answer lies within the HVI and its myriad of parameters!
As seen above, strength = Gms per Tex (or Gm/T)
4) Elasticity % – Elasticity %
Elasticity is a measure of the amount of energy required to stretch a fabric. It is measured in percentage, and it has units of Joules per meter.
The elasticity is calculated using the equation:
- Original length (m) = Length after stretching (m) – Length before stretching (m).
- Extension (m) = Original length * Elasticity %/100%.
5) Unit Weight (G/M2)-Unit Weight
UNIT WEIGHT is the weight of the fabric per unit area. It is expressed in g/m2 and is used to calculate the price of the fabric.
6) Trash %- Trash %
Trash % is a measure of the foreign matter content in a bale. It is measured as a percentage of the weight of the bale, and can be determined by weighing or measuring it with a hydrometer or manometer. If you have access to both types of equipment (hydrometers are used for testing liquids while manometers are used for measuring gases), then you can determine how much trash your product has by using one type at certain intervals throughout its life cycle and comparing them against each other.
Trash % is also important because it determines how much money you lose when selling an HVI product because there’s no way around this rule: if your product has too much trash content, then you won’t get paid enough money on top of what it costs to produce those materials!
7) GPT – Grade Progressing Trend Measurement
GPT is a measure of the quality of cotton fibre. It is an important parameter for cotton quality and it can be defined as the ratio between weight and length.
GPT is a measure of the strength and elasticity of cotton fibres. It also expresses how much force it takes to break or rupture a given piece (i.e., breaking point). GPT values range from 0% (no strength) to 100%, which means that all fibres in your sample have been completely broken apart by one another during testing procedures
8) Colorgrade Days(Dy)- Colour Dye Date Value
- COLORGRADE DAYS(DY) – COLOUR DYE DATE VALUE
This parameter is used to determine the colour grade days. The value of this parameter can be used as a guide in determining the dyeing date. If you have more than one colour material, then you can use this parameter for each material separately.
HVI Parameters Measure Final Quality Attributes Of Cotton Bale
HVI parameters are used to measure final quality attributes of cotton bale. These parameters include:
- Weight (W)
- Length (L)
- Width (W)
The HVI parameters are taken into consideration in order to evaluate the cotton bale’s final quality attributes. The HVI parameters are used by cotton manufacturers to determine which processing steps need to be undertaken, or whether they should improve the quality of the material further.
Author: Afzaal Khadim Khan
Owner: Textiles Bar